An elevator car, with a mass of 450 kg is suspended by a single cable. at time = 0s, the elevator car is raised upward. the tension on the cable is constant at 5000n during the first 3 seconds of operation. determine the magnitude of the velocity of the elevator at time = 3 seconds.

Which statement best describes resistance? resistance is a. how well a current will flow in a material and is measured in volts. b. how well a material conducts an electrical charge and is measured in ohms. c. the ability of a material to attract a positive charge to create a current. d. the ability of a material to repel neutral charges and is measured in ohms.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Atruck driver is attempting to deliver some furniture. first, he travels 8 km east, and then he turns around and travels 3 km west. finally, he turns again and travels 13 km to his destination. what is the drivers distance