The fracture strength of glass may be increased by etching away a thin surface layer. it is believed that the etching may alter the surface crack geometry (i. e. reduce crack length and increase tip radius). calculate the ratio of the etched and original crack tip radii if the fracture strength is increased by a factor of 4 when 52.0% of the crack length is removed.

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

i don't know that i agree with that but what's the question ?