During a collision, a bus runs into a skateboarder inelastically. if the mass of the skateboarders is 70 kg and is moving at 12 m/s to the right, what is the final velocity of the skateboarder if the 2000 kg bus is traveling at 25 m/s to the left before the collision?

An airplane flying parallel to the ground undergoes two consecutive displacements. the first is 76 km at 39.8◦ west of north, and the second is 156 km at 59.9◦ east of north. what is the magnitude of the plane’s total displacement? answer in units of km. 020 (part 2 of 2) 10.0

1. consider the case in which air fills air shocks on a truck trailer. the pressure in the shocks is 2 mpa. the temperature is 300 k. the diameter of the shock piston is 10 cm and the initial length of the cylindrical cavity containing the compressed air is 40 cm. a. the truck is gradually loaded over a period of a day in a static setting. the temperature is held constant for the atmosphere and thus for the gas shock. calculate the compressibility of the air in the shock for this condition when the truck is initially being loaded. b. if the shocks were loaded in a dynamic setting by driving over bumps, what would be the compressibility? state your assumption. c. what is the initial load on the shock if the shock is in an atmospheric 100 kpa? d. if the shock is compressed using the process described in part a, and the air shock compressed air cavity length decreases to 20 cm, what is the additional load applied to the shock?

The precision of a laboratory instrument is ± 0.05 g. the accepted value for your measurement is 7.92 g. which measurements are in the accepted range? check all that apply. 7.85 g 7.89 g 7.91 g 7.97 g 7.99 g