If 25 ml of each of the liquids in the answer choices below were poured into a 100 ml beaker, which would form the bottom layer? a. sea water – density of 1.024 g/ml b. mineral oil – density of 0.910 g/ml c. distilled water – density of 1.0 g/ml d. petroleum oil – density of 0.820 g/ml

What are similarities and differences of reflection, refraction, diffraction and absorption?

Arigid tank is divided into two equal parts by a partition. one part of the tank contains 3 kg of compressed liquid water at 400 kpa and 60°c while the other part is evacuated. the partition is now removed, and the water expands to fill the entire tank. determine the entropy change of water during this process, if the final pressure in the tank is 40 kpa. use steam tables.

Aresistor with an unknown resistance is connected in parallel to a 9 ω resistor. when both resistors are connected in parallel to an emf source of 21 v, the current through the unknown resistor is measured with an ammeter to be 4 a. what is the resistance of the unknown resistor? answer in units of ω.