Physics, 29.06.2019 15:30 alliemeade1

Which is the best description of the acceleration of an object? an airplane changes elevation from 10,000 ft to 5,000 ft a cars velocity changes from 25 m/s to 20 m/s in 5 seconds a runner travels 100 m in one minute a remote-control car speeds up to 15 m/s

Answers: 1

Show answers

Answers

Answer from: Quest

The speed was not exceeded so it was slow

Answer from: Quest

the design of a ski jumping suit involves a trade-off between giving the skiers lift to get higher jumps and ensuring the skier does not face a lot of drag before the jump itself. an expansive suit may to lift the skier higher, but at the same time, it will also increase the air resistance. higher air resistance as the skier goes down the slope limits the speed of the jump. a big suit also increases the risk of losing balance or control, especially if there's a strong gust of wind. while technologically enhanced suits a lot, clothing is not the only factor in a ski jumper’s success. gathering speed while skiing down the slope, ensuring good speed on the ramp, and maintaining good body posture and form in the air all contribute to a ski jumper's success.

Answer from: Quest

Iassume the answer is 75 feet. inwards to outwards rather than outwards to inwards. probably be 75.hachures are stokes drawn in direction of the steepest slope. a series of short parallel lines drawn on a map to indicate topographic relief. it is actually called hachures on contour lines. the small marks in the center of the feature are called hachures.observe the picture attached

Answer from: Quest

Answer: a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same sign as the -4.0 µc charge.======electricstatic force between two point charges is given by $f = \dfrac{kq_1q_2}{r^2}$ where k is coulomb's constant, 8.99×10⁹ n·m²/c², q₁ and q₂ are the point charges, and r is the distance between the two point charges.assign positive to q₁let q₁ = 6.0 µc, q₂ = -4.0 µc, q₀ represent the charge at the origin, and q₃ represent this new charge to place.the charge at the origin q₀ would experience the following force f₀₁ from q₁, with r = 6.0 m (note that 1 µc = 10⁻⁶ c) $f_{01} = \dfrac{kq_0q_1}{(\text{6.0 m})^2}$ the force from q₂ $f_{02} = \dfrac{kq_0q_2}{(\text{15 m})^2}$ the force from q₃ $f_{03} = \dfrac{kq_0q_1}{(\text{26 m})^2}$ the net force on the origin charge, q₀, has to be zero for no electrostatic forcehaving an equation where k and q₀ can be divided out of the equation will allow us to solve for q₃ $\begin{aligned} f_{net} & = 0\\ f_{01} + f_{02} + f_{03} & = 0 \\ \dfrac{kq_0q_1}{(\text{6.0 m})^2} + \dfrac{kq_0q_2}{(\text{15 m})^2} + \dfrac{kq_0q_3}{(\text{26 m})^2} & = 0 \\ kq_0 \left( \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2}\right) & = 0 \\ \dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2} + \dfrac{q_3}{(\text{26 m})^2} & = 0 \end{aligned}$ isolating: $\begin{aligned} \dfrac{q_3}{(\text{26 m})^2} & = -\dfrac{q_1}{(\text{6.0 m})^2} - \dfrac{q_2}{(\text{15 m})^2} \\ q_3 & = -(\text{26 m})^2\left(\dfrac{q_1}{(\text{6.0 m})^2} + \dfrac{q_2}{(\text{15 m})^2}\right) \\ q_3 & = -(\text{26 m})^2\left(\dfrac{6.0\times10^{-6} \text{ c}}{(\text{6.0 m})^2} + \dfrac{-4.0\times10^{-6} \text{ c}}{(\text{15 m})^2}\right) \\ q_3 & = -1.0064888 \times 10^{-4}\text{ c} \\ q_3 & = -1.0\times 10^{-4}\text{ c} \end{aligned}$ a charge of -1.0 × 10⁻⁴ c must be placed at x = 26 m.the sign of the charge will be the same as the -4.0 µc charge

Another question on Physics

Physics, 22.06.2019 04:00

Acompound machine is also called a machine. a. force b. simple c. complex d. directional

Answers: 1

Answer

Physics, 22.06.2019 05:30

Can anybody me with this? ? (picture included.)

Answers: 1

Answer

Physics, 22.06.2019 23:30

Avector a⃗ has a length of 8.6 m and points in the negative x direction. find the x component of the vector −3.7a⃗ .

Answers: 1

Answer

Physics, 23.06.2019 03:40

Anumber of conditions are required for a population to be in hardy-weinberg equilibrium. which of the following are correct descriptions of the conditions that must be met? check all that apply. a. no mutations b. random mating c. small population d. migration or gene flow e. occurrence of mutations f. no natural selection

Answers: 1

Answer

You know the right answer?

Which is the best description of the acceleration of an object? an airplane changes elevation from...

Questions