Suppose a constant force is the only force applied to an object of unknown mass. what quantities do we need to know in order to find the object's change in momentum? check all that apply. check all that apply. we need to know the change in the position of the object. we need to know the magnitude of the force. we need to know the time interval during which the force acts. we need to know the change in the velocity of the object. impossible: you cannot find the object's change in momentum without knowing its mass.

Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.

Marcella is a four-year-old girl who is a victim of emotional child abuse. based on the child and family services improvement and innovation act of 2011, which action should the government take for marcella? a. the state should arrest marcella’s abuser. b. the state should find a home for marcella as soon as possible. c. the state should enforce stricter laws in the area where marcella resides. d. the state should provide medical assistance to marcella.

Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.