On a cool morning, uyen’s breath can form a cloud when she breathes out. which changes of state are most responsible for uyen seeing her breath in this way? melting and condensation vaporization and condensation sublimation and deposition condensation and sublimation

vaporization and condensation

Explanation:

Condensation is the phenomena of conversion of gas into liquid.Vaporization can be define as the phenomena of conversion of liquids into gas or vapors.

The vaporization is the process by which liquids are converted into gas or vapors, whereas the condensation is the process by which the gases or vapors are converted into liquid.

The moisture in the breath get vaporized due to vaporization. The cold air outside in the cool morning condensed the water vapor into another forms called as the tiny droplets in the form of ice or liquid water, which can be seen in the form of clouds.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).