Juan and kuri are on a carousel. juan is closer to the center of the carousel than kuri. which statement describes their tangential speeds? a. juan and kuri move the same distance in one revolution, but juan completes the revolution in less time and has a higher speed. b. juan and kuri complete one revolution in the same time, but juan travels a shorter distance and has a lower speed. c. juan moves a shorter distance in less time than kuri, but their speeds are the same. d. juan and kuri complete one revolution in the same time, so they have the same speed.

The answer is...B

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

the answer is a. the yacht traveled from the dock north to the 200-meter marker in the bay in less than 5 minutes, giving the passengers several more hours to fish.

im doing peak rn so sry if its wrong