Compare and contrast nuclear fusion and fission. explain what occurs in these reactions and what types of atoms are involved. also discuss two safety issues that arise with nuclear fission and fusion and what kinds of conditions are needed to start these reactions

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

Time remainin52: 42the chart shows data for a moving object.which conclusion is best supported by the information inthe chart? time (s)velocity (m/s

** urgent** the voltage across the primary winding is 350,000 v, and the voltage across the secondary winding is 17,500 v. if the secondary winding has 600 coils, how many coils are in the primary winding? a- 30 coilsb- 583 coilsc- 12,000 coilsd- 332,500 coils