Graph the line of the equation 5x+2y=12 using its slope and y-intercept.

Step-by-step explanation:

First you need to put the equation in slope intercept form.

y = mx + b   (m = slope and b = y-intercept)

5x + 2y = 12   (subtract 5x)

2y = -5x + 12   (now you need to isolate y. Therefore, divide all by 2)

y = -5/2x + 6

Now you have your slope and y-intercept. Your y-intercept will be 6. So on the graph you need to begin at 6 on the y-axis (the line that goes up and down). Make your first point there. Your slope is the -5/2x. Slope is looked at as rise/run. This means from your point at 6, you will go down (down because it's negative. If it was a positive, you would go up, i.e rise) 5 units. Then you will go over to the right 2 units (to the right because it is positive. Only the top one will be negative.) Place your point once you have done that. Then draw a line between those two points.

(note that on my screenshot, the tiny squares do not equal 1 unit. The larger ones with the bunch of tiny squares inside equal 1 unit)

I hope this helped :)

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).

the 1st digit is in the 100s n its 1

step-by-step explanation:

3,589÷18 = 199.389

so the first digit of the quotient is in the 100s n its 1