Mathematics, 20.08.2019 09:00 valencial0917

directions: drag each tile to the correct box.
order the following conditions in order from the largest number of possible triangles to the least number of possible triangles.
condition a: a perimeter of 12 and even-numbered side lengths
condition b: a side length of 4 inches, a side length of 5 inches, an included angle of 110º, and a perimeter of 11 inches
condition c: a right triangle with an area less than 13 square inches and odd-numbered leg lengths greater than 1 inch
condition d: an isosceles triangle with two angles that measure 50º

Answers: 1

Show answers

Answers

D, C, A nad then B
Figure out the number of possible triangles that fit condition A. There are 3 possible combinations of three even numbers that sum to 12.Of these three, there is only one where every length is less than the sum of the other two: 4 inches,4 inches, 4 inches. So, there is only one triangle that fits condition A.Figure out the number of possible triangles that fit condition B. Since the perimeter and two side lengths are given, subtract the two side lengths from the perimeter to get the length of the third side.Sketch a triangle with lengths of 2 inches, 4 inches, and 5 inches.From the sketch, the angle between the 4-inch length and 5-inch length has to be the smallest angle. Since it has to be the smallest angle, it cannot be more than a right angle. So, there is zero triangles that fit condition B.Figure out the number of possible triangles that fit condition C. For the area to be less than13 square inches, the product of the legs must be less than 26 square inches. The right triangles with odd-numbered legs greater than 1 inch whose product is less than 26 square inches are shown below.So, three triangles fit condition C.Figure out the number of possible triangles that fit condition D. If two angles of an isosceles triangle measure 50º, the third can be found by subtraction both angle measures from 180º.So, the angle measures must be 50º, 50º, and 80º. There is no condition on the lengths, so there are an infinite number of triangles that fit condition D.Therefore, the conditions in order of greatest possible triangles to least are shown below.condition D, condition C, condition A, condition B

Answer from: Quest

The household makes $424.45

Answer from: Quest

answer: e 9, 5.75

step-by-step explanation:

step 1

find the variation ab in the x coordinate

delta x=(x2-x1)=10-> 8 units

find the variation ab in the y coordinate

delta y=(y2-y1)=6-> 2 units

step 2

find the coordinates point c

x coordinate

cx=ax+delta x*2/> cx=2+8*(2/> cx=3

y coordinate

cy=ay+delta y*2/> cy=4+2*(2/> cy=4.25

the coordinates of point c are (3,4.25)

step 3

find the coordinates point d

x coordinate

dx=ax+delta x*4/> dx=2+8*(4/> dx=4

y coordinate

dy=ay+delta y*4/> dy=4+2*(4/> dy=4.5

the coordinates of point d are (4, 4.5)

step 4

find the coordinates point e

x coordinate

ex=ax+delta x*4/> ex=2+8*(6/> ex=5

y coordinate

ey=ay+delta y*4/> ey=4+2*(6/> ey=4.75

the coordinates of point e are (5, 4.75)

step 5

find the coordinates point f

x coordinate

fx=ax+delta x*4/> fx=2+8*(8/> fx=6

y coordinate

fy=ay+delta y*4/> fy=4+2*(8/> fy=5

the coordinates of point f are (6,5)

step 6

find the coordinates point g

x coordinate

gx=ax+delta x*4/> gx=2+8*(10/> gx=7

y coordinate

gy=ay+delta y*4/> gy=4+2*(10/> gy=5.25

the coordinates of point g are (7,5.25)

step 7

find the coordinates point h

x coordinate

hx=ax+delta x*4/> hx=2+8*(12/> hx=8

y coordinate

hy=ay+delta y*4/> hy=4+2*(12/> hy=5.5

the coordinates of point h are (8,5.5)

step 8

find the coordinates point i

x coordinate

ix=ax+delta x*4/> ix=2+8*(14/> ix=9

y coordinate

iy=ay+delta y*4/> iy=4+2*(14/> iy=5.75

the coordinates of point i are (9,5.75)

- r3ktforgood ☕

Another question on Mathematics

Mathematics, 21.06.2019 16:10

Determine whether the following statements are true and give an explanation or counterexample. bold a. when using the shell method, the axis of the cylindrical shells is parallel to the axis of revolution. bold b. if a region is revolved about the y-axis, then the shell method must be used. bold c. if a region is revolved about the x-axis, then in principle it is possible to use the disk/washer method and integrate with respect to x or the shell method and integrate with respect to y.

Answers: 3

Answer

Mathematics, 21.06.2019 16:30

An automated water dispenser fills packets with one liter of water on average, with a standard deviation of 5 milliliter. the manual says that after a year of operation the dispenser should be tested to see if it needs recalibration. a year later a number of filled packets are set aside and measured separately. it is found that the average packet now contains about 0.995 liters. does the dispenser need calibration? explain your answer.

Answers: 2

Answer

Mathematics, 21.06.2019 18:30

The volume of gas a balloon can hold varies directly as the cube of its radius. imagine a balloon with a radius of 3 inches can hold 81 cubic inches of gas. how many cubic inches of gas must be released to reduce the radius down to 2 inches?

Answers: 2

Answer

Mathematics, 21.06.2019 19:00

There is an entrance to the computer room at point e which lies on ab and is 5 feet from point a. plot point e on the coordinate plane. find the distance from the entrance at point e to the printer at point e

Answers: 1

Answer

You know the right answer?

directions: drag each tile to the correct box.
order the following conditions in order from t...

Questions

Mathematics, 11.09.2020 14:01

What is the percent 200% of 54...