You’re working in the product development department of a large toy manufacturer. The two grids you’re working with will be laser cut and inserted into an interactive shapes game for toddlers. The dots on the grid are 1 inch apart. Two grids. The first grid consists of the following shapes: A rectangle with a length of 1 and a height of 4. A square with a length of 3. A square with a length of 1. 2 triangles with a base of 1 and a height of 1. The second shape consists of the following shapes: A triangle with a base of 4 and a height of 3. A square with a length of 3. Q. Find the total area for the two shapes in order to determine how much raw material will be cut away from the surface. Type the correct answer in the box. sq in

answer: the two figures are congruent.

step-by-step explanation: they're congruent because figure efgh is reflected across the x and y axis but it was also rotated.

hope it !

the smallest possible measurement of the width is 14 feet

step-by-step explanation:

let's assume length of parallelogram is 'l'

width of parallelogram is 'w'

the perimeter of a parallelogram must be no less than 40 feet

so, we get

we are given

length of parallelogram is 6 feet

so,

l=6

we can plug it

now, we can solve for w

subtract both sides by 12

divide both sides by 2

and we get

so,

the smallest possible measurement of the width is 14 feet

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).

the answer is:

the answer is:

to solve the problem, we need to remember the quotient of power property, it's defined by the following relation:

if we have a quotienf of powers that have the same base, we need to keep the same base and subtract the exponent of the denominator power to the exponent of the numerator power.

so, we are given the expression:

then, calculating we have:

hence, the answer is:

have a nice day!