The graph for Pool A shows the gallons of water filling the pool as a function of time.
The graph for Pool B shows the rate of filling the pool as a function of time.
Use the drop-down menus to complete the statements below about the two pools

d. millimeters per hour.

step-by-step explanation:

we are given that,

carlo used a rain gauge to measure the amount of water his lawn is receiving from the sprinklers.

since, according to the options, we see that,

water cannot be measured by 'miles per hour', 'meters per second' and 'grams per seconds'.

we get that, the water can be measured by 'millimeters per hour'.

hence, the appropriate rate for describing the amount of water is 'millimeters per hour'.

-3

step-by-step explanation:

a drawing really does here:

so i draw the horizontal line y=2 and the vertical line x=-2 at this intersection i put b (this is where my right angle is going to be).   so point b is at (-2,2).   point a is 5 units long and is also on y=2 so this point has to be (3,2) or (-7,2) -doesn't matter i will go with (3,2).

now we know c is at (-2,y) we don't know the y yet bet we know that c is on x=-2.

we have the area of the triangle is .5bh=12.5

we know the base length is 5 (ab)

we have the height is (2-y) if you look at your

plug in

.5(5)(2-y)=12.5

solve for y to get the y-coordinate for c

2.5(2-y)=12.5

divide both sides by 2.5 giving:

2-y=5

now subtract 2 on both sides

-y=3

y=-3

answer: the answer is 30 miles per hour.

ft/s -> mphmph = ft/s 1.466667mph = 44 divided by 1.466667mph = 30.00000

- r3ktforgood ☕

70

step-by-step explanation: