You work in a machine design department and need to specify the diameter of a pin that slides back and forth through a hole. the hole diameter is specified as .500 inch with a tolerance of .010 inch. the maximum pin diameter must be .002 inch smaller than the minimum hole diameter. if the pin diameter has a tolerance of .010 inch, what diameter, in inches, should you specify for the pin?

i believe

step-by-step explanation:

from my conclusion c

the ratio of white tiles to blue tiles is 48: 16. the ratio in it's simplest form is 3: 1.

step-by-step explanation:

ratio: take the first number and add a colon next to it, then add the second number after that. make sure the ratio order matches up with the written problem!

simplest form: we can simplify the ratio 48 : 16 by dividing both terms by the greatest common factor (gcf).

the gcf of 48 and 16 is 16.

divide both terms by 16:

48 ÷ 16 = 3

16 ÷ 16 = 1

reducing to simplest form:

48 : 16 = 3 : 1

246

step-by-step explanation: