To obtain information on the corrosion-resistance properties of a certain type of steel conduit, 45 specimens are buried in soil for a 2-year period. the maximum penetration (in mils) for each specimen is then measured, yielding a sample average penetration of x = 52.1 and a sample standard deviation of s = 4.7. the conduits were manufactured with the specification that true average penetration be at most 50 mils. they will be used unless it can be demonstrated conclusively that the specification has not been met. state the rejection region(s) for an ? = 0.05 test. if the critical region is one-sided, enter none for the unused region. round your answers to two decimal places?

step-by-step explanation:

if u want da anser kill your teeser ifu hav wun

(0,-3) see attached graph

step-by-step explanation:

a. to solve the system, graph the two equations.

x = y+3 becomes y=x-3 has m=1/1 and b=-3. start at (0,-3) on the y-axis and plot a point. then move up 1 unit and 1 unit to the right. plot a point and connect.

y=-4x+3 has m =-4/1 and b=-3. start at (0,-3) on the y-axis and plot a point. then move down four units and to the right 1 unit. plot a point and connect.

the solution is the point (x,y) where the two lines intersect. by the graph below it is (0,-3).

b. to solve by substitution, substitute y = -4x-3 into x= y+3

x= (-4x-3) +3

x=-4x

5x=0

x=0

now substitute x = 0 back in to find y.

y= -4(0)-3

y=0-3

y=-3

solution is (0,-3)

c. use elimination by adding the equations together.

x-y=3

4x+y=-3

5x=0

x=0

then substitute into one equation to find y.

y=-4(0)-3

y=-3

the 1st digit is in the 100s n its 1

step-by-step explanation:

3,589÷18 = 199.389

so the first digit of the quotient is in the 100s n its 1

y + 11 = (1/4)(x + 16)

step-by-step explanation: