Engineering, 24.12.2021 07:20 cherylmorton7302
lymer is initially exposed to 13.8 MPa of axial tension at room temperature. If the polymer features a relaxation time of 26.2 hr at room temperature, how long will it take for the tensile stress in the polymer to reach 10.3 MPa
Answers: 3
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
lymer is initially exposed to 13.8 MPa of axial tension at room temperature. If the polymer features...
Mathematics, 18.03.2021 01:20
Mathematics, 18.03.2021 01:20
Mathematics, 18.03.2021 01:20
History, 18.03.2021 01:20
Mathematics, 18.03.2021 01:20
Mathematics, 18.03.2021 01:20
Social Studies, 18.03.2021 01:20
Mathematics, 18.03.2021 01:20
Mathematics, 18.03.2021 01:20
Chemistry, 18.03.2021 01:20
History, 18.03.2021 01:20
Biology, 18.03.2021 01:20