Engineering, 14.12.2021 05:00 annafellows
Your aircraft (Weight = 2000 N) is about to take off with a lift coefficient of CL = 0.9. Perform the following calculations and show all your work:
1- Take off Speed (Hint: Assume that your wing Area is 10 m^2 and that the take off is happening at sea level where density is rho = 1.225 Kg/m^3 - Ignore the effect of the stabilizer on lift).
2- Lift coefficient at altitude assuming a cruising speed V= 225 m/s (Hint: Apply the same formula as before)
Which condition will be closer to the stall velocity? Explain why.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
You know the right answer?
Your aircraft (Weight = 2000 N) is about to take off with a lift coefficient of CL = 0.9. Perform th...
Questions
English, 04.10.2020 14:01
Computers and Technology, 04.10.2020 14:01
English, 04.10.2020 14:01
Geography, 04.10.2020 14:01
Mathematics, 04.10.2020 14:01
History, 04.10.2020 14:01
Health, 04.10.2020 14:01
Mathematics, 04.10.2020 14:01
