12. A vacuum leak is detected in an automot
engine. Technician A says the leak should
most n...
Engineering, 13.12.2021 18:00 abilovessoftball
12. A vacuum leak is detected in an automot
engine. Technician A says the leak should
most noticeable at highway speeds. Technic
B says the vacuum leak should be most not
able at idle. Who is right?
(A) A only.
(B) B only.
(C) Both A and B.
(D) Neither A nor B.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
Questions
Health, 09.09.2021 21:00
Mathematics, 09.09.2021 21:00
Mathematics, 09.09.2021 21:00
History, 09.09.2021 21:00
English, 09.09.2021 21:00
Mathematics, 09.09.2021 21:00
Mathematics, 09.09.2021 21:00
English, 09.09.2021 21:00
English, 09.09.2021 21:00
