Engineering, 10.12.2021 18:50 RyannLambertt7141

Equimolar Counterdiffusion of NH3 and N2 at Steady State. Ammonia gas (A) and nitrogen gas (B) are diffusing in counterdiffusion through a straight glass tube 2.0 ft (0.610 m) long with an inside diameter of 0.080 ft (24.4 mm) at 298 K and 101.32 kPa. Both ends of the tube are connected to large mixed chambers at 101.32 kPa. The partial pressure ofNH3 in one chamber is constant at 20.0 kPa and 6.666 kPa in the other chamber. The diffusivity at' 298 K and 101.32 kPa is 2.30 x 10- 5 m2/s. (a) Calculate the diffusion of NH3 in kg mol/s.
(b) Calculate the diffusion of N2
(c) Calculate the partial pressures at a point 1.0 ft (0.305 m) in the tube and plot PA, PB, and P versus distance z.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

Answer

You know the right answer?

Equimolar Counterdiffusion of NH3 and N2 at Steady State. Ammonia gas (A) and nitrogen gas (B) are d...

Questions