Engineering, 06.12.2021 18:20 risolatziyovudd
Consider a circular furnace that is 0.5m long and 1.0 m in diameter. The top surface (surface -1) of the furnace has an emissivity of 0.5 and a power input of 1x105 W by radiant heaters. The side walls (surface -3) consist of well-insulated refractory material, while the bottom consists of the steel plate (surface -2), which has an emissivity of 0.8. Assume diffuse, gray surface behavior for the heater and the plate and the bottom steel plate is at 350 K. Answer the following questions:
(a) Compute the view factors F12 and F33
(b) Draw the radiation network for this problem
(c) By doing the energy balance for the 3 nodes, compute the radiocities (J1 and
J2) for top surface and the bottom steel plate.
(d) Compute the temperature of the top surface (T1).
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
You know the right answer?
Consider a circular furnace that is 0.5m long and 1.0 m in diameter. The top surface (surface -1) of...
Questions
Arts, 31.10.2019 01:31
English, 31.10.2019 01:31
Mathematics, 31.10.2019 01:31
Mathematics, 31.10.2019 01:31
Social Studies, 31.10.2019 01:31
Advanced Placement (AP), 31.10.2019 01:31
Mathematics, 31.10.2019 01:31
History, 31.10.2019 01:31
Mathematics, 31.10.2019 01:31
