Engineering, 02.12.2021 17:50 jannatbibix

Which of the following best describes one similarity between Terrafugia's Transition and a typical U. S. road vehicle? Press enter to interact with the item, and press tab button or down arrow until reaching the Submit button once the item is selected
A. Both must get over 30 miles per gallon (13 kilometers/liter) of gasoline in order to be classified as fuel-efficient vehicles by the FAA.
B. Both must meet the safety regulations of the National Highway Traffic Safety Administration in order to travel on U. S. roads.
C. Both must weigh less than 1,430 pounds (649 kilograms) and fit into a standard garage in order to be classified as a Light Sport Aircraft.
D. Both must meet the safety regulations of the Federal Aviation Administration in order to be sold in the U. S.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

Engineering, 04.07.2019 18:20

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

Answer

You know the right answer?

Which of the following best describes one similarity between Terrafugia's Transition and a typical U...

Questions