Engineering, 01.12.2021 19:10 wolfsaway
Why is the axis of rotation of a wheel which is rolling without slipping the point of contact and not the center?.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
Why is the axis of rotation of a wheel which is rolling without slipping the point of contact and no...
History, 20.04.2020 03:24
Mathematics, 20.04.2020 03:24
Mathematics, 20.04.2020 03:24
Spanish, 20.04.2020 03:24
History, 20.04.2020 03:24
History, 20.04.2020 03:24
Mathematics, 20.04.2020 03:24
Mathematics, 20.04.2020 03:25