subject
Engineering, 25.11.2021 14:00 jtingley0502

Two layers of 4mm-thick glass, sandwiching a 4mm air gap in between, is used for a window of 2 meters wide and 1 meter tall. You can consider them as three layers. The three layers have the same width, height, and thickness. The thermal energy flowing through each of the three layers are the same every second. The thermal conduction power through one glass layer is the same as that through the air gap. The thermal conductivity of air (0.024 W/mC) is 33.3 times smaller than that of glass (0.80 W/mC). Q8. The actual temperature difference across the air gap is how many times the temperature difference across one layer of the glass now

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
You know the right answer?
Two layers of 4mm-thick glass, sandwiching a 4mm air gap in between, is used for a window of 2 meter...
Questions
question
Mathematics, 23.02.2021 01:40
question
Mathematics, 23.02.2021 01:40