Engineering, 29.10.2021 07:30 timozy95

R-134a enters a throttling valve as a saturated liquid at a pressure of 14 bar. The mass flow rate into the throttling valve is 2 kg/s. The R-134a leaves the throttling valve at 5 bar and then enters into a separator. Two streams exit the separator, one that is saturated vapor and one that is saturated liquid, both at a pressure of 5 bar. The separator is not insulated and is located in a high temperature environment, so the heat transfer rate to the separator is 30 kJ per kg of R-134a entering the separator. a. Determine the temperature and quality at the inlet and exit of the throttling valve and and at the inlet and exits of the separator.
b. Determine the mass flow rate of vapor from the separator.
c. Determine the mass flow rate of liquid from the separator.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

You know the right answer?

R-134a enters a throttling valve as a saturated liquid at a pressure of 14 bar. The mass flow rate i...

Questions