subject
Engineering, 25.10.2021 01:00 katrinanuez

On Friday 5th July 2020, at 3.35 pm, a forklift driver, Max White, was driving the forklift he usually operates in the Sunny Side Warehouse, ABC Street, when the front right tire got caught on a piece of wood on the ground, causing the forklift to overturn with Max inside it. Luckily a co-worker was nearby to help Max climb out of the right side of the forklift. Max was shaken up and reported that his left shoulder and left side of his neck were hurting him from the impact. Max decided he did not need to go to the hospital as he felt like he would only obtain bruises from his injuries and that they were not severe enough to require medical attention. His manager sent him home for the rest of the day to ensure he did not strain himself further. The wood that caused the forklift to overturn had not been appropriately stacked and has now been moved to a secure location in the warehouse to make sure it does not cause any more issues for forklift drivers". 3.1 Who is responsible for this workplace accident? Explain your answer(10)

3.2 How could this accident have been prevented? (10)

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
On Friday 5th July 2020, at 3.35 pm, a forklift driver, Max White, was driving the forklift he usual...
Questions
question
Mathematics, 04.05.2020 23:41
question
History, 04.05.2020 23:41