subject
Engineering, 13.10.2021 23:50 stephensandrew4293

Ferrous sulfate is used as a coagulant and lime as a coagulant aid at a water treatment planttreating 26,500 m3/day. The specific gravity of the floc and adhered suspended material is 1.005 at a temperature of 10oC. Determine:a. The overflow rate in m3/d-m2if the flow is and the clarifier is 18.29m by 36.57m. b.The settling rate in cm/sec for the overflow rate determined in 1(a) above. c.The diameter in cm of the of the smallest floc particle that is of a size that is 100% removed if it is assumed that the particles are spherical in shape.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Ferrous sulfate is used as a coagulant and lime as a coagulant aid at a water treatment planttreatin...
Questions
question
Social Studies, 04.12.2021 21:30
question
Mathematics, 04.12.2021 21:30
question
Geography, 04.12.2021 21:40
question
Mathematics, 04.12.2021 21:40
question
Advanced Placement (AP), 04.12.2021 21:40