subject
Engineering, 13.10.2021 01:00 Jacobstoltzfus

A bag contains four dice: a 4-sided die, two 8-sided dice and a 12-sided die. A person chooses a die from the bag at random and rolls it. The number of sides that the selected die has is denoted by the random variable S and the number rolled by the random variable X. a) Derive the probability distribution of the number rolled with the selected die. Use your expression for p(X) to determine the probability that the first number rolled is 3. That is, what is p(X = 3)?b) Given that the roll was a 3, what’s the posterior probability that the selected die had 12 sides? That is, what is p(S = 12|X = 3)?c) A bag contains four dice: a 4-sided die, two 8-sided dice and a 12-sided die. A person chooses a die from the bag at random and rolls it. The number of sides that the selected die has is denoted by the random variable S and the number rolled by the random variable X. d) Suppose the person rolls the same die a third time after telling you that the first two rolls were 3 and 7. Denote the thi

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
question
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
A bag contains four dice: a 4-sided die, two 8-sided dice and a 12-sided die. A person chooses a die...
Questions
question
English, 11.10.2021 20:00
question
Mathematics, 11.10.2021 20:00
question
Mathematics, 11.10.2021 20:00
question
Geography, 11.10.2021 20:00
question
Social Studies, 11.10.2021 20:00