Engineering, 05.10.2021 01:00 Mariaisagon9050
A pipeline having length 13 meter and is placed inclined an angle 20 with the horizontal . Assume that the diameter of lower end is 100 mm where velocity of water is 3.75 m/sec upward and the upper end is 300 mm . Determine the difference of pressure between the two endas of the pipe section.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
You know the right answer?
A pipeline having length 13 meter and is placed inclined an angle 20 with the horizontal . Assume th...
Questions
Mathematics, 13.12.2021 19:00
Geography, 13.12.2021 19:00
SAT, 13.12.2021 19:00
Chemistry, 13.12.2021 19:00
Mathematics, 13.12.2021 19:00
Advanced Placement (AP), 13.12.2021 19:00
Mathematics, 13.12.2021 19:00
