Engineering, 04.10.2021 23:30 jackfrost5

Q2. The circuit shown in Figure 1 has seven resistors. The resistors are connected in series as well as in parallel and they are supplied with 32V. Calculate the: Total resistance b. Total current drawn from the supply [3] Potential difference across the R3 and the R7 resistors [4] [10] a. C. R3 = 90 R4 = 80 R1 = 30 Rs = 8a Rs = 40 R2 = 60 R = 32 32V

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

Engineering, 04.07.2019 19:10

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

Answer

You know the right answer?

Q2. The circuit shown in Figure 1 has seven resistors. The resistors are connected in series as well...

Questions