Engineering, 04.10.2021 07:00 ahmedeldyame
9. Imagine that you're performing measurements on a circuit with a multimeter. You measure a total circuit
current of 2 A, and the circuit is powered by a 24 V power supply. What total resistance value would you
expect to measure in the circuit?
A. 242
Β. 48 Ω
C. 12 Ω
D. 222
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
9. Imagine that you're performing measurements on a circuit with a multimeter. You measure a total c...
Questions
Advanced Placement (AP), 26.06.2019 21:40
English, 26.06.2019 21:40
Social Studies, 26.06.2019 21:40
