Engineering, 12.09.2021 18:10 markjiron2880
A capacitive sensor element can be used to measure air pressure in a pneumatic system. Use the attached datasheet to design an air pressure sensor. Your design must include everything from the primary sensing element (Protron capacitive pressure sensor) up to the input of a microcontroller responsible for digitizing the sensor output and processing it further. Your unique specifications are given below. Assume that you are sensors analog output is interpreted on a linear scale (e. g. 0V = 0.9 bar and 5V = 1.25 bar with a linear relationship for everything in between). Calculate the total error* of your sensor (including the error incurred during digitalization) and validate your design by means of simulation software.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor¡n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
A capacitive sensor element can be used to measure air pressure in a pneumatic system. Use the attac...
Questions
Social Studies, 29.07.2019 05:00
History, 29.07.2019 05:00
Social Studies, 29.07.2019 05:00
History, 29.07.2019 05:00
Mathematics, 29.07.2019 05:00
Mathematics, 29.07.2019 05:00
