In the process of producing engine valves, the
valves are subjected to a first grind. Valves
...
Engineering, 07.09.2021 07:50 cadez
In the process of producing engine valves, the
valves are subjected to a first grind. Valves
whose thicknesses are within the specification
are ready for installation. Those valves whose
thicknesses are above the specification are
reground, while those whose thicknesses are
below the specification are scrapped. Assume
that after the first grind, 74% of the valves meet
the specification, 15% are reground, and 11% are
scrapped. Furthermore, assume that of those
valves that are reground, 90% meet the
specification, and 10% are scrapped.
Find the probability that a valve is ground only once. Round
the answer to two decimal places.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
You know the right answer?
Questions
