Engineering, 27.08.2021 01:20 jocelynmarquillo1
The impeller on the radial flow pump has an average inlet radius of 5 cm and outlet radius of 15 cm and an average width of 3 cm. If the blade angles are 20o and 10o at inlet and outlet respectively, determine the flow through the pump, the ideal pump head when the impeller is rotating at 360 rpm. The flow onto the impeller is in the radial direction.
Answers: 2
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
The impeller on the radial flow pump has an average inlet radius of 5 cm and outlet radius of 15 cm...
Mathematics, 22.04.2021 16:40
Mathematics, 22.04.2021 16:40
English, 22.04.2021 16:40
Chemistry, 22.04.2021 16:40
Mathematics, 22.04.2021 16:40
Mathematics, 22.04.2021 16:50
Computers and Technology, 22.04.2021 16:50
Chemistry, 22.04.2021 16:50
Mathematics, 22.04.2021 16:50
Mathematics, 22.04.2021 16:50
Mathematics, 22.04.2021 16:50
Mathematics, 22.04.2021 16:50