Engineering, 19.08.2021 01:00 moniquejg1800
An AISI 1040 cold-drawn steel tube has an outside diameter of 50 mm and an inside diameter of 42 mm. The tube is 150 mm long and is capped at both ends. Determine the maximum allowable internal pressure for a static factor of safety of 2 for the tube walls
Answers: 2
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
An AISI 1040 cold-drawn steel tube has an outside diameter of 50 mm and an inside diameter of 42 mm....
Mathematics, 22.02.2021 03:40
Mathematics, 22.02.2021 03:40
Mathematics, 22.02.2021 03:40
English, 22.02.2021 03:40
Mathematics, 22.02.2021 03:40
Mathematics, 22.02.2021 03:40
Mathematics, 22.02.2021 03:40
Mathematics, 22.02.2021 03:40
Chemistry, 22.02.2021 03:40
Social Studies, 22.02.2021 03:40
Mathematics, 22.02.2021 03:40
English, 22.02.2021 03:40
Mathematics, 22.02.2021 03:40
Mathematics, 22.02.2021 03:40