stion 1: [18 A thin plate shown in Figure 1 consists of four elements shape, which are a square, right-angled triangle, rectangle, and semi-circle. The square and the right-angled triangle are solid materials. Whereas the rectangle and semi-circle are the cut-outs. If all dimensions in Figure 1 are in meters. Use the table method to calculate the centroid location of the thin plate taking point A as the reference. Importantly, indicate the XA and yA values of each element shape in the table. Y 0.3 0.1 0.1 0.08 0.1 AC X 0.08 0.06 0.13 0.05 Figure 1: Thin plate with all dimensions in meter.​

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.