Engineering, 26.07.2021 03:10 ZenmasterZack
PLZ ANSWER QUICKLY! Identify the tolerance levels for the processes.
The die casting process supports a tolerance less than
.The sand casting process supports a tolerance level of
and above.
1. A. 0.01mm B. 1mm C. 0.1mm
2. A. 0.01mm B. 1mm C. 0.1mm
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
PLZ ANSWER QUICKLY! Identify the tolerance levels for the processes.
The die casting process suppor...
Questions
English, 01.04.2021 17:50
History, 01.04.2021 17:50
Mathematics, 01.04.2021 17:50
Mathematics, 01.04.2021 17:50
Mathematics, 01.04.2021 17:50
Health, 01.04.2021 17:50
Mathematics, 01.04.2021 17:50
Mathematics, 01.04.2021 17:50
Social Studies, 01.04.2021 17:50
Mathematics, 01.04.2021 17:50
Mathematics, 01.04.2021 17:50
Mathematics, 01.04.2021 17:50
Mathematics, 01.04.2021 17:50
