subject
Engineering, 22.07.2021 22:50 mely2668

QUAL DOS TIPOS DE PARTIDAS ELÉTRICAS PARA MOTORES TRIFÁSICAS POSSUI A SEGUINTE DESVANTAGEM: A TENSÃO DE LINHA DA REDE DEVE COINCIDIR COM A TENSÃO DA LIGAÇÃO TRIÂNGULO DO MOTOR? a)PARTIDA DIRETA
b)PARTIDA ESTRELA TRIÂNGULO
c)PARTIDA COMPENSADORA
d)PARTIDA COMPENSADORA COM REVERSÃO

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
question
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
You know the right answer?
QUAL DOS TIPOS DE PARTIDAS ELÉTRICAS PARA MOTORES TRIFÁSICAS POSSUI A SEGUINTE DESVANTAGEM: A TENSÃO...
Questions
question
Mathematics, 21.05.2020 02:07