Engineering, 09.07.2021 19:50 ashylynn2423
Writing assembly language program for MC6800 Microprocessor for copying data aftervalidation. Consider the following memory mapAddressData0030H05H0031H06H0032H 09H0033H11H0034H14HEach data will be copied from these locations (0030H to 0034H) to new locations starting from$0040. Before copying, each data will be checked, whether it is an odd or even. If odd, it will be converted to even and if even, it will be converted to odd before copying. Your program must work for any data stored in the above memory locations. Procedure:1.Write the program in 6800SDK Emulator, assemble and run it. Once done, upload the program for evaluation.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Writing assembly language program for MC6800 Microprocessor for copying data aftervalidation. Consid...
Social Studies, 21.05.2020 01:02
Mathematics, 21.05.2020 01:02
English, 21.05.2020 01:02
Mathematics, 21.05.2020 01:02
Mathematics, 21.05.2020 01:02
English, 21.05.2020 01:02
Mathematics, 21.05.2020 01:02
Mathematics, 21.05.2020 01:02
Mathematics, 21.05.2020 01:02
Mathematics, 21.05.2020 01:02