Engineering, 01.07.2021 17:10 michelle8978
A stainless steel tube with an outside diameter of 60 mm and a wall thickness of 7 mm is used as a compression member. If the axial normal stress in the member must be limited to 190 MPa, determine the maximum load P that the member can support.
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
Engineering, 04.07.2019 19:10
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
A stainless steel tube with an outside diameter of 60 mm and a wall thickness of 7 mm is used as a c...
Chemistry, 31.03.2020 03:07
Biology, 31.03.2020 03:07
Mathematics, 31.03.2020 03:07
Mathematics, 31.03.2020 03:07
Mathematics, 31.03.2020 03:07
English, 31.03.2020 03:07