subject
Engineering, 29.06.2021 22:10 travisjpatterson

a solar dryer has been used to dry keropok lekor delicacy. the solar dryer with width of 1m withdraws a volume flow rate of 0.15 m/s under an ambient temperature of 37 °c. there is a solar collector attached to the solar dryer exposing to the heat from the sun. the solar collector has 3 m long, 1 m wide and 3 cm gap between the glass and base. the solar collector collects the heat from radiation for 365 w. calculate the temperature of the sensor t1 and t2. evaluate the system if keropok lekor required to dry at constant of 60 °c for 5 hours. ​

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
a solar dryer has been used to dry keropok lekor delicacy. the solar dryer with width of 1m withdraw...
Questions
question
English, 06.11.2020 23:10
question
Medicine, 06.11.2020 23:10
question
Mathematics, 06.11.2020 23:10
question
History, 06.11.2020 23:10