A cold drawn shaft of 1144 steel is loaded with alternating bending moment and steady torsion 202.2 N. m and 31.6 N. m., respectively. Use the information listed below to find the safety factor using modified Goodman failure criterion. - The small and larger diameters are 25 mm and 50 mm, respectively. - All transitions in the shaft are filleted with radius of 1 mm. - The shaft operates at room temperature - The reliability goal is 99.9

On a average work day more than work place firs are reorted

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k