Engineering, 15.06.2021 23:00 lovemichelle638
A 120-volt fluorescent ballast has an input current of 0.34 ampere and an input power rating of 22 watts. The power factor of the ballast is .
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
A 120-volt fluorescent ballast has an input current of 0.34 ampere and an input power rating of 22 w...
Questions
History, 25.03.2021 22:30
Chemistry, 25.03.2021 22:30
Chemistry, 25.03.2021 22:30
Mathematics, 25.03.2021 22:30
Advanced Placement (AP), 25.03.2021 22:30
Social Studies, 25.03.2021 22:30
Physics, 25.03.2021 22:30
History, 25.03.2021 22:30
