Engineering, 13.06.2021 03:40 shelbybibb99

1. Identify the origin point and the orientation 2. Read the engineering drawing (unit MMGS), identify the features and the profiles for the features (including the reference planes for the sketches) 3. Define the reference plane, create the sketches and perform the features 4. Check the result, the total volume should be 64161.72 mm3 5. Save your file as FirstName_ LastName_WS 3.sldprt and submit through SAKAI

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

You know the right answer?

1. Identify the origin point and the orientation 2. Read the engineering drawing (unit MMGS), identi...

Questions