subject
Engineering, 07.06.2021 16:20 ella3714

Time left 0:42:59 Two balanced three phase loads are connected in parallel, the loads are L,=30 kVA at 0.9 pf lag, and L2= 40 kW at 0.795 pf lag.
The loads are fed from a distribution line with an impedance of 0.1+j0.1 /0. The line to neutral voltage at the load end is 288 V
and zero phase shift, the phase current of the second load in A (if it is A-connected) is;
O A. 26.73-j20.39
O B. 33.35-14.30
O C. 100.04-112.89
O D. 80.19-361.18
O E 46.30-135.32
O F.57.76-17.44
O G. None
Two balanced three phase loads are connected in parallel, the loads are L1=30 KVA at 0.9 pf lag, and L2= 40 kW at 0.795 pf lag.
The loads are fed from a distribution line with an impedance of 0.1+j0.1 92/0. The line to neutral voltage at the load end is 288 V
and zero phase shift, the capacitance of A-connected capacitor bank that connected parallel to the loads to improve the power factor
to unity in uF is; (f=60 Hz)
A 154.92
OB. 51.64
OC 464.76
OD. 1394.28
O E. None​

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
Time left 0:42:59 Two balanced three phase loads are connected in parallel, the loads are L,=30 kVA...
Questions
question
Mathematics, 06.01.2022 06:00
question
Social Studies, 06.01.2022 06:00