subject
Engineering, 31.05.2021 21:20 alvalynnw

A liquid propellant engine has the following characteristics: chamber pressure of 7 MPa, constant ratio of specific heats of 1.3, and a characteristic velocity of 1600 m/s. The nozzle has the following characteristics: throat area of 0.010 m2 and an expansion ratio of 10. Calculate the following: 1. Thrust coefficient at sea level
2. Specific impulse at sea level
3. Altitude at optimal expansion
4. Thrust coefficient at optimal expansion
5. Mass flux through the throat

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
You know the right answer?
A liquid propellant engine has the following characteristics: chamber pressure of 7 MPa, constant ra...
Questions