Engineering, 31.05.2021 14:00 beebeck6573

Q1. Aliya has recently enrolled for a computer software development course and now she will be requiring a laptop in order to study it. She belongs to a middle lower class so the laptop is considered as a luxury for her. Since we all are in a pandemic situation, some classes are going to be online and some physical, hence the need for laptop is critical. The battery life should be very good in order to last long for physical classes. Video camera should be good so that online classes can be taken properly. Processor speed needs to be fast since to run software, high processor is required. Following is the criteria that Aliya has set to influence her buying decision 1 being the lowest and 10 being the highest score.

storage battery price camera processor warranty
5 8 9 8 9 8

You have asked your brother to recommend you a good laptop so that all things can be done smoothly. Your brother has given you various options with different weights allocated to each of the option.

Models storage battery price camera processor warranty
Acer 3 6 7 7 7 3
Apple 9 8 2 9 9 6
LG 5 7 8 6 5 5
Lenovo 8 6 6 7 5 5
Dell 8 9 9 8 8 8
HP 6 9 10 9 8 9

a) You are required to explain the whole Decision Making Process with reference to above information provided. (6 Marks) (500 word limit)
b) Which model Aliya should buy based on the criteria available. State your reasons why? (4 Marks) (200 word limit)

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

Answer

You know the right answer?

Q1. Aliya has recently enrolled for a computer software development course and now she will be requi...

Questions