Engineering, 30.05.2021 14:00 jumana3
A reinforced concrete column of 300 mm diameter contains 4 steel
bars of 22 mm diameter, Find the total load the column can
carry if the stresses in steel and concrete is 50Mpa and 3Mpa
respectively.
Answers: 2
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
A reinforced concrete column of 300 mm diameter contains 4 steel
bars of 22 mm diameter, Find the t...
English, 23.08.2019 00:30
Mathematics, 23.08.2019 00:30
Mathematics, 23.08.2019 00:30
Mathematics, 23.08.2019 00:30
History, 23.08.2019 00:30
Mathematics, 23.08.2019 00:30
Mathematics, 23.08.2019 00:30
History, 23.08.2019 00:30
Mathematics, 23.08.2019 00:30
History, 23.08.2019 00:30
History, 23.08.2019 00:30
History, 23.08.2019 00:30