Engineering, 25.05.2021 22:20 canyonrico05
STOIIP= H = 150 m N/G = 0.70 Porosity = 0.32 So = 0.62 Sg = 0.55 Bo = 1.35 Bg = 1/250 Size of square = 1000 m Use top as = -900 m GOC = -1100 m OWC=-1300
Answers: 1
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
STOIIP= H = 150 m N/G = 0.70 Porosity = 0.32 So = 0.62 Sg = 0.55 Bo = 1.35 Bg = 1/250 Size of square...
Mathematics, 03.12.2019 21:31
Social Studies, 03.12.2019 21:31
Mathematics, 03.12.2019 21:31
Mathematics, 03.12.2019 21:31
History, 03.12.2019 21:31
Mathematics, 03.12.2019 21:31
Geography, 03.12.2019 21:31
Computers and Technology, 03.12.2019 21:31
Mathematics, 03.12.2019 21:31