Engineering, 19.05.2021 18:30 leximae2186

One piece is cylindrical with a hemispherical hat (the flat face of hemisphere rests flush on top of the flat face of the cylinder). The diameter of the cylinder and hemisphere are identical at 2r inches, and the height of the cylinder is 2r inches. The second piece is a cube with a mountedcylinderon it such that one of the flat facesof the cylinder is resting on the top face of the cube. The four edges of the cube are tangential to the circle of the cylinder resting on it. The side of a cube has a length of 2r inches and the height of the cylinder is r inches. The third piece is a cube with a mounted hemisphere on it such that the flat face of the hemisphere is resting on the top face of the cube. The four edges of the cube are tangential to thecircle of the hemisphere resting on it. The side of a cube has a length of 2r inches and the radius of the sphere is r inches. Required:
Which piece will solidify the fastest and which piece the slowest?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

You know the right answer?

One piece is cylindrical with a hemispherical hat (the flat face of hemisphere rests flush on top of...

Questions