subject
Engineering, 18.05.2021 18:40 isamar7342

A four-lane divided multilane highway (two lanes in each direction) in rolling terrain has five access points per mile and 11-ft lanes with a 4-ft shoulder on the right side and a 2-ft shoulder on the left. The peak-hour factor is 0.84 and the traffic stream consists of 6% trucks, 4% buses, and 3% recreational vehicles. The driver population adjustment factor is estimated at 0.90. If the analysis flow rate is 1250 pc/h/ln, what is the peak-hour volume

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
You know the right answer?
A four-lane divided multilane highway (two lanes in each direction) in rolling terrain has five acce...
Questions
question
History, 14.09.2021 06:20
question
Chemistry, 14.09.2021 06:20
question
Physics, 14.09.2021 06:20
question
Mathematics, 14.09.2021 06:30